Likely fix

Fix: Game console says no signal on TV

A console no signal problem is usually caused by wrong TV input, loose HDMI, display resolution mismatch, HDCP issue, or console sleep/power state.

Quick answer

Select the correct HDMI input, reconnect HDMI, restart the console, then try another HDMI cable or port.

Important warning

HDMI switches, capture cards, and AV receivers can add another failure point. Connect the console directly to the TV while testing.

1 Make sure the console is powered on.
2 Select the correct HDMI input on the TV.
3 Unplug and reconnect the HDMI cable at both ends.
4 Restart the console.
5 Try another HDMI port on the TV.
6 Try another HDMI cable.
7 If the console was used with another TV, reset video output settings if your console supports it.
8 Disable or bypass HDMI switches, capture cards, or receivers while testing.

Wrong TV input.

Loose HDMI cable.

Console is asleep or frozen.

Resolution or HDR mismatch.

HDCP handshake issue.

HDMI switch or receiver problem.

Why does my TV say no signal with my game console?

The TV may be on the wrong input, the HDMI cable may be loose, or the console may be outputting a resolution the TV cannot display.

Can HDR or resolution settings cause no signal?

Yes. If a console is set to a mode the TV does not support, the screen can go black or show no signal.

Should I remove my HDMI switch while testing?

Yes. Connect the console directly to the TV to rule out the switch or receiver.